AUQDD Fuel Injection Throttle Body (For L4-2.4L) Fit For 2010-2011 Bu-ick LaCrosse /10-11 Chevy Equinox 08-12 Malibu /10-11 GMC Terrain /08-10 Pon-tiac G6 (Replace # 12616668 12631186 TB1033 S20015)

Description

Product Fitment Information:

Compatible With Bu-ick
============
2011 Regal (L4-2.4L)
2010 Allure (L4-2.4L)
2010-2011 LaCrosse (L4-2.4L)

Compatible With Chevy
============
2008 Cobalt (L4-2.4L)
2008-2011 HHR (L4-2.4L)
2008-2012 Malibu (L4-2.4L)
2010-2011 Equinox (L4-2.4L)

Compatible With GMC
============
2010-2011 Terrain (L4-2.4L)

Compatible With Pon-tiac
============
2008 G5 (L4-2.4L)
2008-2010 G6 (L4-2.4L)
2008-2009 Solstice (L4-2.4L)

Compatible With Sat-urn
============
2008-2009 Aura (L4-2.4L)
2008-2010 Sky (L4-2.4L)
2008-2010 Vue (L4-2.4L)

Package Includes:
1 x Electronic Fuel Injection Throttle Body Assembly – TB1033 (12-Month Warranty)

Part Specifications
Connector:6 Pin Male
Inside Diameter:2-9/16 In. (65 mm)

Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)

Installation Notes

After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.

This is because the newly installed throttle body parameters are inconsistent with the original.

Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.

When the computer cannot match, you can use the following manual method to match

1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute.

The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ～ 2 days of self-learning.