AUQDD Fuel Injection Throttle Body Assembly (For 3.0L/3.6) Fit For 2008-2011 Cadi-llac CTS STS,07-11 SRX /10-11 Chevy Camaro Equinox/GMC Terrain (Replace # TB1044 S20018 12604075 12616994)

Description

Product Fitment Information:

Compatible With Bu-ick
=========
2010 Allure [For V6-3.0L]
2010 LaCrosse [For V6-3.0L]

Compatible With Cadi-llac
=========
2010-2011 CTS [For V6-3.0L]
2008-2011 CTS [For V6-3.6L]
2010-2011 SRX [For V6-3.0L]
2007-2009 SRX [For V6-3.6L]
2008-2011 STS [For V6-3.6L]

Compatible With Chevy
=========
2010-2011 Camaro [For V6-3.6L]
2010-2011 Equinox [For V6-3.0L]

Compatible With GMC
=========
2010-2011 Terrain [For V6-3.0L]

Package Includes:
1 x Electronic Fuel Injection Throttle Body Assembly – TB044 (12-Month Warranty)

Part Specifications
Connector:6 Pin Male
Inside Diameter:2-13/16 In. (72 mm)

Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)

Throttle Body Installation Notes

After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.

This is because the newly installed throttle body parameters are inconsistent with the original.

Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.

When the computer cannot match, you can use the following manual method to match

1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute.

The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ～ 2 days of self-learning.