AUQDD Fuel Injection Throttle Body Assembly (wo/EVAP port) Fit For 2009-2010 Toy-ota Corolla Matrix 1.8L 110cid/1798cc (To 12/2010)(Replace # TB1140 S20090 22030-0T040 22030-37010)

Description

About us

Inc. is well-known as a leader in providing quality auto parts to the aftermarket.
Innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every AUQDD part.

Product Fitment Information:

Compatible With Pon-tiac – wo/EVAP port
===========
2009 Vibe [For L4-1.8L 110cid/1798cc](To 6/30/09)

Compatible With Toy-ota – wo/EVAP port
===========
2009-2010 Corolla [For L4-1.8L 110cid/1798cc](To 12/2010)
2009-2010 Matrix [For L4-1.8L 110cid/1798cc](To 12/2010)

Package Includes:
1 x Electronic Fuel Injection Throttle Body Assembly – TB1140 (12-Month Warranty)

Part Specifications
Connector:6 Pin Male
Inside Diameter:2-3/16 In. (56 mm)

Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)

Throttle Body Installation Notes

After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.

This is because the newly installed throttle body parameters are inconsistent with the original.

Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.

When the computer cannot match, you can use the following manual method to match

1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute.

The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ～ 2 days of self-learning.